Berthoud 700cx40 fenders & special hardware

Berthoud 700c x 40mm fender pair & additional hardware.  

You get more than the "typical" Berthoud fender set whe you purchase from us.  In addtion to the fender stays mounting stuff and the forkcrown Daruma, you receive also a package of 6 Phil's leather washers (3 thick and 3 medium) as well as  6 M5 bolts and washers to attach to most bridges and some rack undersides.  

Note that fenders do pose safety risks. If something gets wedged between a fender and wheel, lock-up can occur which can be catostrophic up front. 

Be sure to select $10 shipping (to the lower 48) if you select this item

These fenders are the ones to use if your running pretty narrow 700c tires.  For 30mm tires, we prefer to use the 50mm fenders.  But if your frame has limited clearance, then these may be a great choice.

These stainless fenders are really very pleasant to install. The stay mounting (to the fender) is perhaps the best we've seen and makes for more toe clearance than a typical Honjo type mounting. The front fender is indented by the crown, and both fenders are pre-drilled for the stays. The rear fender is drilled by the chainstay bridge but you will need to drill by the seatstay bridge and if you are mounting the front fender to the underside of your front rack. 

The photo is just for illustration and shows one of the many Berthoud fenders we offer. If the cart says we are out of stock, please email us as we can usually get these back in stock in just 3 or 4 business days.