Berthoud 650bx60 (26") fenders & special hardware

Berthoud 650b x 60mm fender pair & additional hardware.  

Please allow 4 extra business days for shipping of this item

These are really 26" -  they follow pretty nicely the curve of the tire at a height of about 18 or 19mm.  With a bit of typical tweaking, you can easily open them up even more.

These fenders are relatively flat and very wide - use only on frames with lots of clearance width wise.   This fender doesn't have much side wrap as it is pretty flat.  So best for a frame with lots of width, but not so much clearance length wise.

You get more than the "typical" Berthoud fender set whe you purchase from us.  In addtion to the fender stays mounting stuff and the forkcrown Daruma, you receive also a package of 6 Phil's leather washers (3 thick and 3 medium) as well as  6 M5 bolts and washers to attach to most bridges and some rack undersides.  

Note that fenders do pose safety risks. If something gets wedged between a fender and wheel, lock-up can occur which can be catostrophic up front. 

Be sure to select $10 shipping (to the lower 48) if you select this item

These stainless fenders are really very pleasant to install. The stay mounting (to the fender) is perhaps the best we've seen and makes for more toe clearance than a typical Honjo type mounting. The front fender is indented by the crown, and both fenders are pre-drilled for the stays. The rear fender is drilled by the chainstay bridge but you will need to drill by the seatstay bridge and if you are mounting the front fender to the underside of your front rack. 

The photo is just for illustration and shows one of the many Berthoud fenders we offer.