Shopping Cart
# of Item(s): 0
Total: $0.00

Search Results

Found 41 product(s) for Fenders, Mudflaps and hardware (1-41 of 41)

z   Information on fenders
z Information on fenders


Need More Info as you shop the items below?  We have more information on Fenders and Mudflaps and related items.

Note:  There is a safety risk associated with the use of fenders.  The additional information on the link below discusses this risk.


Click here to see the additional information

Price: $0.00

Rear fender reinforcement diamond shape gorgeous!
Rear fender reinforcement diamond shape gorgeous!

Rear fender reinforcement. Diamond shape.

We finally have some of these gems in stock!  The great rando bicycle builders, Rene Herse, Alex Singer, and many others, almost always used one of these on their rear fenders (usually on smooth 700c alloy fenders).  This is for aluminum fenders.  Primarily used on smooth alloy 700c, you can probably use it on other alloy fenders as well. The virtue of this piece is that it significantly reduces the risk of a failure of the fender where it attaches to the underside of a seatstay bridge mounting flange.  It is not for fenders that use a sliding or other type of mounting bracket.

This is a very hard part to "fabricate" on your own as it has a compound bend.

In time, we may try to bring in a larger batch and bring the price down.  But considering how nice this piece is and how much time it saves compared with making one, the price is very reasonable.  The piece does not include any hardware.  Also, please limit yourself to only 2 of these for now until we can secure a larger stock. 

Price: $14.00

Phil's Washers Variety Pack
Phil's Washers Variety Pack
Phil's Washers - premium leather washer variety pack. A new offering of 2 of the traditional thick Phil's washers, 2 slightly thinner ones, and 2 that are a good bit thinner.  The idea is that between these sizes, you can tweak your fender installation a bit.  Even the thin ones are really stout!  The photo shows the regular 6 pack offering.  Here you are getting 6 total.

Note that all the washers very a bit in width and shape - we do our best to sort them and group them by thickness.

These washers have holes sized for 5mm bolts/studs..
Price: $7.00

Phil's Washers
Phil's Washers

Phil's Washers - premium thick leather washers. Tired of thin/flimsy leather washers that don't have "body?" Well, so were we. Plus, we'd been making our own washers as we needed them, which is very time consuming. So we had the leather wiz make us some nice thick washers. These are really thick. You can torque things down against them, and they still have lots of body left. They are actually handmade, so you will notice that some are more centered than others, but it doesn't matter. 

Because they are handmade, the width varies too. We have just changed what you get a bit - you get three of the very thick and 3 that are still thick but a tad thinner.  For most installations, this is quite handy.

These washers make installation of fenders and racks-to-fenders much more fun and quick. They are sold in a package of 6. They are more expensive than others you will find, but so what? We aren't talking big money here. Our goal is to provide great stuff, not the cheapest stuff. Proudly made in the USA (although we don't guarantee where the Cows were made). These washers have holes sized for 5mm bolts/studs.

Price: $7.00

Honjo Minimalist Mudflap Pair
Honjo Minimalist Mudflap Pair
A really nifty mudflap pair for those who want minimalist mudflaps.  Some folks crave mudflaps that are very lightweight and often resort to making them from remains of common household products.  But Honjo has done the work for you - and at only $8 for the pair!  That is hard to beat.  We're not really sure what these are made from.  They are like an impregnated carbonish rubbery material.  But they look really nice and are certain to do the job. 
Price: $9.00

Honjo Hardware Forkcrown Daruma
Honjo Hardware Forkcrown Daruma
A Honjo Forkcrown Daruma.  For attaching your front fender to the underside of your forkcrown.  Requires that you have something going through your forkcrown (i.e a brake caliper or a rack or a dummy bolt) for it to fit around.
Price: $5.00

Honjo Hardware Deluxe Allen Daruma 5mm
Honjo Hardware Deluxe Allen Daruma 5mm

Honjo Hardware - deluxe 5mm Daruma set (4).  If you have dropouts that are threaded, you can't use a typical daruma to tighten the stays to the dropouts unless you file back the threads near the base of the bolt.  But these darumas are the best kept secret in Honjo world.  You thread the Daruma in, secure it with a nut to really lock it in.  Then you lock the stay in for good to the daruma with an allen set screw.  

Now we noticed that Honjo supplied these with rubber grommets which we'd think are for use on mounting the stay to the fender.  We suppose you could to that, but doesn't seem to make so much sense to us.  Just wondering....

Price: $18.00

Honjo Hardware Deluxe Allen Daruma 4mm
Honjo Hardware Deluxe Allen Daruma 4mm

Honjo Hardware - deluxe 4mm Daruma set (4).  If you have dropouts that are threaded, you can't use a typical daruma to tighten the stays to the dropouts unless you file back the threads near the base of the bolt.  But these darumas are the best kept secret in Honjo world.  You thread the Daruma in, secure it with a nut to really lock it in.  Then you lock the stay in for good to the daruma with an allen set screw.  

Now we noticed that Honjo supplied these with rubber grommets which we'd think are for use on mounting the stay to the fender.  We suppose you could to that, but doesn't seem to make so much sense to us.  Just wondering....

Price: $18.00

Honjo Hardware caliper brake ltd clearance spl mounting
Honjo Hardware caliper brake ltd clearance spl mounting
Honjo Hardware special mounting brackets for limited clearance applications.  If you are mounting a slender fender on a bike with brake calipers that provide little clearance, then these are the widgets you need.  They seem pretty simple, but our guess is they were made in limited quantity and that is why they are so pricey.  But if you are tying to squeek some nifty fenders onto a bike where it is difficult, these might just save the day.

The Honjo literature says "...exclusive short arch brake Kind Dura-ace, Ultegra, etc.

We hope that helps  - and of course, please call or email us if that is not sufficient.
Price: $33.00

Honjo Hardware 3.2mm Daruma set
Honjo Hardware 3.2mm Daruma set
Honjo 3.2mm Daruma bolts (4) for securing 3.2mm fender stays to fenders.
Price: $18.00

Honjo Hardware #18 rear mudguard attachment
Honjo Hardware #18 rear mudguard attachment
An alternative to using a sliding bridge in the rear.  To mount the fender to the seatstay bridge.

This looks a lot like the front attachment part for the non-forkcrown daruma mounting.
Price: $7.50

Honjo Hardware #17 Front Mudguard attachment
Honjo Hardware #17 Front Mudguard attachment
If you are not using a forkcrown Daruma, then this is a great alternative.  In some cases, on some bikes for whatever reason, this is a mush-have item.
Price: $7.50

Honjo 700c 51mm H-50 Round fenders
Honjo 700c 51mm H-50 Round fenders
Honjo 700c 50mm round fenders.  A classic simple looking fender that like all Honjo products is beautifully made.  A 50mm fender is great for those who use Grand Bois 30mm tires but want the option to run something wider such as a 32mm Panaracer Pasela.

Fenders have some safety risks associated with them - if debris gets caught between the front tire and the fender, the wheel can lock and the bike can flip. Such an accident can have a terrible outcome.

Remember that our fenders come with all hardware including a sliding bridge for the rear as well as our nifty thick leather washers.  The fenders are nice and long, and also have the necessary indent by the forkcrown; not all Honjo's are supplied with this.  

At checkout for shipping to the lower 48 be sure to select the $10 shipping option at checkout.  Should the on-line store indicate that we are out of these, let us know as we get them back in stock in just a few days.
Price: $143.00

Honjo 700c 45mm H-40 smooth  - Rene Herse favorite!
Honjo 700c 45mm H-40 smooth - Rene Herse favorite!
Honjo 700c 45mm smooth round Rene Herse Favorite!  This fender is 22mm high.  This is just like the fenders found on all those wonderful Rene Herse and Alex Singer relatively skinny tire 700c bikes of the 1970's!  We've used these on new Rene Herse bikes, and we know that Alex Singer in France uses them on their 700c bikes too.  We can't offer a better endorsement.  These fenders work great for tires up to and including the 30mm Grand Bois.  

Remember that our fenders come with all hardware including a sliding bridge for the rear as well as our nifty thick leather washers.  The fenders are nice and long, and also have the necessary indent by the forkcrown; not all Honjo's are supplied with this.  

At checkout for shipping to the lower 48 be sure to select the $10 shipping option at checkout.  Should the on-line store indicate that we are out of these, let us know as we get them back in stock in just a few days
Price: $138.00

Honjo 700c 45mm H-31 Smooth La Paon shape!
Honjo 700c 45mm H-31 Smooth La Paon shape!

One of our favorite 700c fenders!

Honjo 700c 45mm Le Paon shape fenders.  These fenders in smooth as are offered here are a classic 7 sided shape.   Many folks really like the way these look.  They are also quite long - 950mm in the front and 1250 in the rear.

Since there are some many "segments", the overall shape is effectively round in terms of clearance,

At checkout for shipping to the lower 48 be sure to select the $10 shipping option at checkout.  Should the on-line store indicate that we are out of these, let us know as we get them back in stock in just a few days

Do be sure to read our fender warnings on our website - fenders do pose safety risks should debris get caught between a front fender and the tire which can cause the front wheel to lock up.  That can cause an accident that ends very badly.

Remember that our fenders come with all hardware including a sliding bridge for the rear as well as our nifty thick leather washers.  We also supply some extra M5 bolts for direct attaching of fenders to bridge faces or racks that have the M5 threads.  The fenders are nice and long, and also have the necessary indent by the forkcrown; not all vendors supply Honjo's this way.  

At checkout for shipping to the lower 48 be sure to select the $10 shipping option at checkout.  Should the on-line store indicate that we are out of these, let us know as we get them back in stock in just a few days

Price: $138.00

Honjo 700c 45mm H-31 Hammered gorgeous round shape
Honjo 700c 45mm H-31 Hammered gorgeous round shape

One of our favorite hammered 700c fenders!

Honjo 700c 45mm fenders.  In the smooth model, these fenders have a classic 7 sided shape.   But in the hammered version which is offered here, the fenders are really a perfect round shape.  There is something about the proportions of these which make them exceedingly elegant.  These have been the first choice for recent bike builds where we want to use hammered 700c fenders in this width.  

They are also quite long - 950mm in the front and 1250 in the rear.

At checkout for shipping to the lower 48 be sure to select the $10 shipping option at checkout.  Should the on-line store indicate that we are out of these, let us know as we get them back in stock in just a few days

Do be sure to read our fender warnings on our website - fenders do pose safety risks should debris get caught between a front fender and the tire which can cause the front wheel to lock up.  That can cause an accident that ends very badly.

Remember that our fenders come with all hardware including a sliding bridge for the rear as well as our nifty thick leather washers.  We also supply some extra M5 bolts for direct attaching of fenders to bridge faces or racks that have the M5 threads.  The fenders are nice and long, and also have the necessary indent by the forkcrown; not all vendors supply Honjo's this way.  

At checkout for shipping to the lower 48 be sure to select the $10 shipping option at checkout.  Should the on-line store indicate that we are out of these, let us know as we get them back in stock in just a few days

Price: $149.00

No Image Available
Honjo 700c 43mm H-29 Smooth Fenders

A smooth fender with flutes.  This width with sufficient height above tire will permit use of tires such as the Grand Bois Cypres.  This fender has the "longer" front length of 930mm preferred by many rando riders.

Do be sure to read our fender warnings on our website
- fenders do pose safety risks should debris get caught between a front fender and the tire which can cause the front wheel to lock up.  That can cause an accident that ends very badly.

Remember that our fenders come with all hardware including a sliding bridge for the rear as well as our nifty thick leather washers and some M5 bolts and washers.  The fenders  have the necessary indent by the forkcrown; not all vendors supply Honjo's this way.  

At checkout for shipping to the lower 48 be sure to select the $10 shipping option at checkout.  Should the on-line store indicate that we are out of these, let us know as we get them back in stock in just a few days.

Price: $142.00

Honjo 700c 42mm H-1 Hammered Fenders
Honjo 700c 42mm H-1 Hammered Fenders

Honjo calls these 44mm ,"but they are really more like 42mm wide.  These are like the ones we've been using on our favorite bikes for years.  They have a flute on each side.  Be aware that these fenders are not as long as some of the other wider models.  These fenders are 18.8mm high.

Do be sure to read our fender warnings on our website - fenders do pose safety risks should debris get caught between a front fender and the tire which can cause the front wheel to lock up.  That can cause an accident that ends very badly.

Remember that our fenders come with all hardware including a sliding bridge for the rear as well as our nifty thick leather washers and some M5 bolts and washers.  The fenders  have the necessary indent by the forkcrown; not all vendors supply Honjo's this way.  

At checkout for shipping to the lower 48 be sure to select the $10 shipping option at checkout.  Should the on-line store indicate that we are out of these, let us know as we get them back in stock in just a few days.

Price: $145.00

Honjo 700c 41mm H-30 Round Smooth fenders
Honjo 700c 41mm H-30 Round Smooth fenders
Honjo 700c 41mm round smooth fenders.  Perfect for those using tires such as the Challange Paris Robaix.  For the Grand Bois 30mm tires, we usually go a bit wider.  These fenders are simple and gorgeous.  Remember that classic Rene Herse and Alex Singer bicycles used smooth fenders that looked virtually identical to these.

Remember that fenders can be risky to use.  Debris can get caught between the front wheel and fender which can cause the bike to flip.  Such an accident can have a terrible outcome.

Remember that our fenders come with all hardware including a sliding bridge for the rear as well as our nifty thick leather washers and some M5 bolts and washers.  The fenders have the necessary indent by the forkcrown; not all Honjo's are supplied with this.  

At checkout for shipping to the lower 48 be sure to select the $10 shipping option at checkout.  Should the on-line store indicate that we are out of these, let us know as we get them back in stock in just a few days.
Price: $132.00

Honjo 700c 35mm H-35 fenders smooth round
Honjo 700c 35mm H-35 fenders smooth round

This fender is a round smooth fender. It is ideal for those creating a "hot rod" narrow 700c fender bicycle.  We really wouldn't use these for tires much beyond 23mm.  And make sure you have sufficient frontThis fender is a round smooth fender. It is ideal for those creating a "hot rod" narrow 700c fender bicycle. 

Do be sure to read our fender warnings on our website
- fenders do pose safety risks should debris get caught between a front fender and the tire which can cause the front wheel to lock up.  That can cause an accident that ends very badly.

Remember that our fenders come with all hardware including a sliding bridge for the rear as well as our nifty thick leather washers and some handy M5 allen head bolts and washers.  

At checkout, for shipping to the lower 48, be sure to select the $10 shipping option at checkout. 

Price: $124.00

Honjo 700c 35mm H-27 fenders with spiffy flat top
Honjo 700c 35mm H-27 fenders with spiffy flat top

Honjo 700c 35mm fenders with spiffy flat top.

A wonderful fender that is 35mm high with a height of 16.7mm.  For relatively skinny tires. This fender has a nifty flat section on the top.  If you are keen on painting the top ridge of the fender in a color to match or contrast with your frame, than the smooth version is the skinny fender of choice. 

Do be sure to read our fender warnings on our website - fenders do pose safety risks should debris get caught between a front fender and the tire which can cause the front wheel to lock up.  That can cause an accident that ends very badly.

Remember that our fenders come with all hardware including a sliding bridge for the rear as well as our nifty thick leather washers and some handy M5 allen head bolts and washers.  Also, our fenders have the necessary indent by the forkcrown which is necessary but not always provided.

At checkout, for shipping to the lower 48, be sure to select the $10 shipping option at checkout. 

Price: $121.00

Honjo 650b 62mm H-80 round smooth fenders
Honjo 650b 62mm H-80 round smooth fenders
Honjo 650b 62mm round smooth fenders. 

Please allow 4 extra business days for deliver of this item.

 If you have the clearance, this could be a great way to go.  There is something elegant about a simple aluminum fender.  This fender is 28mm tall.  Perfect for those Hetre tires if you want an especially generous clearance.

Remember that our fenders come with all hardware including a sliding bridge for the rear as well as our nifty thick leather washers.  The fenders are nice and long, and also have the necessary indent by the forkcrown; not all Honjo's are supplied with this.  

At checkout for shipping to the lower 48 be sure to select the $10 shipping option at checkout. 
Price: $156.00

Honjo 650b 58mm H79 Fluted fenders
Honjo 650b 58mm H79 Fluted fenders
The Honjo H-79 Fluted fender pair.  In stock for immediate shipment.  We secured a stock of these fenders before they recently sold out at the importer.  

This fender is tall, so it provides more wrap than the shallower height fenders.  Be sure you have sufficient height to mount this tall fender.  But if you do, you will be rewarded with a full coverage fender for the wide 42 Grand Bois Hetre tire.   

This fender is extremely elegant with its nice shaping and two flutes.

Note that fenders carry safety risks - debris can collapse a front fender against the tire and cause a bike to flip with terrible consequences.   

Our fenders come with all hardware including a sliding bridge for the rear as well as our nifty thick and thin leather washers.  The fenders are nice and long, and also have the necessary indent by the forkcrown; not all Honjo's from other vendors are supplied with this.  

At checkout for shipping to the lower 48 be sure to select the $10 shipping option at checkout. 

Price: $156.00

Honjo 650b 55mm H79 Hammered and fluted fenders
Honjo 650b 55mm H79 Hammered and fluted fenders
The Honjo H-79 Hammered and fluted fender pair.  In stock for immediate shipment.  

The photo is of a fender with a similar shape to the H-79 650b hammered fender.

This fender is tall, so it provides more wrap than the shallower height fenders.  With sufficient height it can be used with the Grand Bois Hetre tire, but it is close.  But you must have enough height!  If the Hetre goes "way up" into the fender, the side clearance is not enough for safety.  In that case, you should use a fender, even a narrower one, that has less height.  But we do use these on our Boulder Bicycles with Hetre tires.  So if your frame has clearance, it is a nice close but sufficient fit.

And for tires in the 35mm to perhaps 38mm range, this fender will provide lots of clearance and lots of wrap around the tire for greater spray protection.

Note that fenders carry safety risks - debris can collapse a front fender against the tire and cause a bike to flip with terrible consequences.  
 

Our fenders come with all hardware including a sliding bridge for the rear as well as our nifty thick and thin leather washers.  The fenders are nice and long, and also have the necessary indent by the forkcrown; not all Honjo's from other vendors are supplied with this.  

At checkout for shipping to the lower 48 be sure to select the $10 shipping option at checkout. 

Price: $169.00

Honjo 650b 51mm H-50 round smooth fenders
Honjo 650b 51mm H-50 round smooth fenders
Honjo 650b 51mm round smooth fender pair.  A classic simple but elegant fender pair.  The fender is 21mm tall.  They seem similar in shape the the Berthoud fenders of similar width.  This fender may let you use a 42mm Hetre tire in situations of limited clearance.  This fender doesn't wrap as much on the side, so therefore you can use it in frames with less clearance.  The fit is still going to be tight (actually not so tight as we've seen with some recent installations).   But the tradeoff is less side wrap.  But for a bike where you want to use 42mm Hertres, and fenders, but don't want to go to bent chainstays or really long chainstays, these are just the ticket!

There are safety risks associated with the use of fenders - if debris gets caught between the front tire and the fender, the wheel can lock which will cause a terrible accident.  So use fenders with caution.

Remember that our fenders come with all hardware including a sliding bridge for the rear as well as our nifty thick leather washers.  The fenders are nice and long, and also have the necessary indent by the forkcrown; not all Honjo's are supplied with this.  

At checkout for shipping to the lower 48 be sure to select the $10 shipping option at checkout.  Should the on-line store indicate that we are out of these, let us know as we get them back in stock in just a few days
Price: $143.00

Honjo 650b 50mm H-85 roundish smooth fenders
Honjo 650b 50mm H-85 roundish smooth fenders
Honjo 650b 50mm round smooth fender pair.  Honjo calls them 48mm, but we come up with 49 to 50mm.  So pretty similar to the H50 in width, but these are 24mm high, which is about 3mm taller than the H50.

Please allow 4 extra business days for delivery of this item.

The photo here shows a fender tht is similar, but not exact - the one in the photo is not as deep.

These are probably best for tires around 35 to 38mm wide.  You could probably use them with the 42mm Hetre tires if you have sufficient height clearance from fender to tire.  If the height clearance is too little, there will not be enough clearance between the sides of the tire and the fender.  

There are safety risks associated with the use of fenders - if debris gets caught between the front tire and the fender, the wheel can lock which will cause a terrible accident.  So use fenders with caution.

Remember that our fenders come with all hardware including a sliding bridge for the rear as well as our nifty thick leather washers.  The fenders are nice and long, and also have the necessary indent by the forkcrown; not all Honjo's are supplied with this.  

At checkout for shipping to the lower 48 be sure to select the $10 shipping option at checkout.  Should the on-line store indicate that we are out of these, let us know as we get them back in stock in just a few days
Price: $148.00

Honjo 650b 48mm H-47 Hammered and fluted fenders
Honjo 650b 48mm H-47 Hammered and fluted fenders
In stock for immediate delivery!

Honjo 650b 48mm Hammered and fluted fenders.  We have used this fender recently and realized that due to its shallow height (about 24mm tall instead of teh 30mm tall of the 55 hammered fenders) this fender actually will work nicely on some bikes with Hetre tires!  The fender is closer to 49mm wide, and if the fender has sufficient height above the tire (around 21mm or so) then this fender is now perhaps the best contender for the narrowest hammered honjo fender that will work with Hetre tires.

Of course, do be aware of fender safety issues (debris caught between the front wheel and a fender can cause a lock-up and a terrible crash) and consider your choice carefully.

The photo shown is NOT of this fender pair.

Remember that our fenders come with all hardware including a sliding bridge for the rear as well as our nifty thick leather washers.  The fenders are nice and long, and also have the necessary indent by the forkcrown; not all Honjo's are supplied with this.  

At checkout for shipping to the lower 48 be sure to select the $10 shipping option at checkout.  Should the on-line store indicate that we are out of these, let us know as we get them back in stock in just a few days
Price: $156.00

Fender Wedge for underside of forkcrown - thin
Fender Wedge for underside of forkcrown - thin
Our proprietary Fender Wedge for underside of forkcrown.  Machined in Boulder CO USA!

We realized years ago that fender hardware had a deficiency.  When mounting a front fender with a forkcrown daruma,, if you have the big rubber washer contacting the crown, the washer sometimes like to "creep" into the crown. (note that traditional French bikes typically had just the rubber between crown and fender, and the large metal washer on the underside of the fender).

Danger - use of fenders has risks - if debris gets caught between a front fender and wheel, the bike can flip causing an accident with terrible consequences.  Use fenders with caution!

Also, a typical installation results in the front of the rubber washer really squished, and the back not very compressed.  Finally, sometimes its nice to take up a bit of gap between the fender and crown (depends on installation - if the fit is already tight, don't use this widget as it will reduce clearance even more and can be a safety issue).

So if your installation will benefit from the attributes of this fork wedge, than now you can avoid the hassle of making one yourself!  

The wedge may reduce the amount of slide on the brake or rack stud inside the crown - in such a case you can enlarge the hole into a slot to give more room with a round file.  But this step is not necessary unless you are working to get an exact placement so the fender lines up with a front rack fender mounting point and you've goofed and need the slide fudge factor.  

The exact thickness of these will vary a bit.  But on the one we just took from the bin, the thin front part is about 2mm thick, and the rear about 3.2mm thick.  

At some point soon, we may a run that are thicker for folks who want to take up larger gaps.



Price: $12.00

Fender Wedge for underside of forkcrown - thick
Fender Wedge for underside of forkcrown - thick
Our proprietary Fender Wedge for underside of forkcrown.  Machined in Boulder CO USA!

This is the thick one to take up bigger gaps.

We realized years ago that fender hardware had a deficiency.  When mounting a front fender with a forkcrown daruma,, if you have the big rubber washer contacting the crown, the washer sometimes like to "creep" into the crown. (note that traditional French bikes typically had just the rubber between crown and fender, and the large metal washer on the underside of the fender).

Danger - use of fenders has risks - if debris gets caught between a front fender and wheel, the bike can flip causing an accident with terrible consequences.  Use fenders with caution!

Also, a typical installation results in the front of the rubber washer really squished, and the back not very compressed.  Finally, sometimes its nice to take up a bit of gap between the fender and crown (depends on installation - if the fit is already tight, don't use this widget as it will reduce clearance even more and can be a safety issue).

So if your installation will benefit from the attributes of this fork wedge, than now you can avoid the hassle of making one yourself!  

The wedge may reduce the amount of slide on the brake or rack stud inside the crown - in such a case you can enlarge the hole into a slot to give more room with a round file.  But this step is not necessary unless you are working to get an exact placement so the fender lines up with a front rack fender mounting point and you've goofed and need the slide fudge factor.  

The exact thickness of these will vary a bit.  But on the one we just took from the bin, the thin front part is a bit over 3mm thick, and the rear about 5.5mm thick.  
Price: $16.00

Campagnolo Bolts and Washers - set of 8
Campagnolo Bolts and Washers - set of 8

Campagnolo Bolts and washers. Set of 8. When you are installing fenders or racks, it is nice to have high quality bolts around to do the job. The most common bolt on many bikes is M5 - both modern and vintage bikes use them everywhere. These bolts and washers are genuine Campagnolo from the days of Nuovo and Super Record. They have a wonderful chrome finish. They fit things like dropout eyelets, waterbottle bosses, and much more. And when assembling your bike, there are many places to use these.

Price: $13.00

Berthoud Updated Tan Leather Mudflap
Berthoud Updated Tan Leather Mudflap
Berthoud Updated Leather Mudflap.  Tan (natural color) - gorgeous, with the nifty Berthoud fancy rivet fastener things like on their saddles. Very thick and rugged, this will enhance the performance and look of your favorite machine with fenders.
Price: $23.00

Berthoud Updated dark brown Leather Mudflap
Berthoud Updated dark brown Leather Mudflap
Berthoud Updated Leather Mudflap.  Dark brown color - gorgeous, with the nifty Berthoud fancy rivet fastener things like on their saddles. Very thick and rugged, this will enhance the performance and look of your favorite machine with fenders.  Note that the tan one is shown in the photo - this one is dark brown.
Price: $23.00

Berthoud Updated Cork color Leather Mudflap
Berthoud Updated Cork color Leather Mudflap
Berthoud Updated Leather Mudflap.  Cork color - gorgeous, with the nifty Berthoud fancy rivet fastener things like on their saddles. Very thick and rugged, this will enhance the performance and look of your favorite machine with fenders.  Note that the tan one is shown in the photo - this one is Cork colored.
Price: $24.00

Berthoud Updated Black Leather Mudflap
Berthoud Updated Black Leather Mudflap
Berthoud Updated Leather Mudflap.  Black - gorgeous, with the nifty Berthoud fancy rivet fastener things like on their saddles. Very thick and rugged, this will enhance the performance and look of your favorite machine with fenders.  Note that the tan one is shown in the photo - this one is Black
Price: $23.00

Berthoud Rear Fender Bracket
Berthoud Rear Fender Bracket
Berthoud Rear fender bracket.  This is a lot of hardware, and it even has an allen nut widget so that if your bike has a recessed allen brake fitting, you can use the "nut widget" to secure the brake and you have a flange to mount the bracket to (along with an allen cap screw to secure it).  How cool is that?  Its kinda like the Sheldon Nuts idea.
Price: $8.00

Berthoud Daruma Bolt
Berthoud Daruma Bolt
Berthoud Daruma Bolt
Price: $4.50

Berthoud 700cx40 fenders & special hardware
Berthoud 700cx40 fenders & special hardware

Berthoud 700c x 40mm fender pair & additional hardware.  

You get more than the "typical" Berthoud fender set whe you purchase from us.  In addtion to the fender stays mounting stuff and the forkcrown Daruma, you receive also a package of 6 Phil's leather washers (3 thick and 3 medium) as well as  6 M5 bolts and washers to attach to most bridges and some rack undersides.  

Note that fenders do pose safety risks. If something gets wedged between a fender and wheel, lock-up can occur which can be catostrophic up front. 

Be sure to select $10 shipping (to the lower 48) if you select this item

These fenders are the ones to use if your running pretty narrow 700c tires.  For 30mm tires, we prefer to use the 50mm fenders.  But if your frame has limited clearance, then these may be a great choice.

These stainless fenders are really very pleasant to install. The stay mounting (to the fender) is perhaps the best we've seen and makes for more toe clearance than a typical Honjo type mounting. The front fender is indented by the crown, and both fenders are pre-drilled for the stays. The rear fender is drilled by the chainstay bridge but you will need to drill by the seatstay bridge and if you are mounting the front fender to the underside of your front rack. 

The photo is just for illustration and shows one of the many Berthoud fenders we offer. If the cart says we are out of stock, please email us as we can usually get these back in stock in just 3 or 4 business days.

Price: $74.00

Berthoud 700c x 50 fenders & special hardware
Berthoud 700c x 50 fenders & special hardware

Berthoud 700c x 50mm fender pair & additional hardware.  

You get more than the "typical" Berthoud fender set whe you purchase from us.  In addtion to the fender stays mounting stuff and the forkcrown Daruma, you receive also a package of 6 Phil's leather washers (3 thick and 3 medium) as well as  6 M5 bolts and washers to attach to most bridges and some rack undersides.  

Note that fenders do pose safety risks. If something gets wedged between a fender and wheel, lock-up can occur which can be catostrophic up front. 

Be sure to select $10 shipping (to the lower 48) if you select this item

These fenders are the ones to use with wide 700c tires - the Gran Bois Cypress for example (the one that is called 32mm but is closer to 31 or so) fits great.  These are the fenders we typically use on our Boulder Bicycle 700c bikes.

These stainless fenders are really very pleasant to install. The stay mounting (to the fender) is perhaps the best we've seen and makes for more toe clearance than a typical Honjo type mounting. The front fender is indented by the crown, and both fenders are pre-drilled for the stays. The rear fender is drilled by the chainstay bridge but you will need to drill by the seatstay bridge and if you are mounting the front fender to the underside of your front rack. 

The photo is just for illustration and shows one of the many Berthoud fenders we offer. If the cart says we are out of stock, please email us as we can usually get these back in stock in just 3 or 4 business days.

Price: $74.00

Berthoud 650bx60 (26") fenders & special hardware
Berthoud 650bx60 (26") fenders & special hardware

Berthoud 650b x 60mm fender pair & additional hardware.  

Please allow 4 extra business days for shipping of this item

These are really 26" -  they follow pretty nicely the curve of the tire at a height of about 18 or 19mm.  With a bit of typical tweaking, you can easily open them up even more.

These fenders are relatively flat and very wide - use only on frames with lots of clearance width wise.   This fender doesn't have much side wrap as it is pretty flat.  So best for a frame with lots of width, but not so much clearance length wise.

You get more than the "typical" Berthoud fender set whe you purchase from us.  In addtion to the fender stays mounting stuff and the forkcrown Daruma, you receive also a package of 6 Phil's leather washers (3 thick and 3 medium) as well as  6 M5 bolts and washers to attach to most bridges and some rack undersides.  

Note that fenders do pose safety risks. If something gets wedged between a fender and wheel, lock-up can occur which can be catostrophic up front. 

Be sure to select $10 shipping (to the lower 48) if you select this item

These stainless fenders are really very pleasant to install. The stay mounting (to the fender) is perhaps the best we've seen and makes for more toe clearance than a typical Honjo type mounting. The front fender is indented by the crown, and both fenders are pre-drilled for the stays. The rear fender is drilled by the chainstay bridge but you will need to drill by the seatstay bridge and if you are mounting the front fender to the underside of your front rack. 

The photo is just for illustration and shows one of the many Berthoud fenders we offer.

Price: $74.00

Berthoud 650bx50 fenders & special hardware
Berthoud 650bx50 fenders & special hardware

Berthoud 650b x 50mm fender pair & additional hardware.  

Note - Please allow 4 extra business days for delivery of this item.  We probably will ship sooner, but with all the Soma and Boulder Bicycle parts we've been sending out, its possible we may run out for a few days.

You get more than the "typical" Berthoud fender set whe you purchase from us.  In addtion to the fender stays mounting stuff and the forkcrown Daruma, you receive also a package of 6 Phil's leather washers (3 thick and 3 medium) as well as  6 M5 bolts and washers to attach to most bridges and some rack undersides.  

Note that fenders do pose safety risks. If something gets wedged between a fender and wheel, lock-up can occur which can be catostrophic up front. 

Be sure to select $10 shipping (to the lower 48) if you select this item

These fenders are flatter (less height for their width) than may other fenders which allows them to provide maximum clearance in tighter spaces. These fenders work very well with the Grand Bois 42mm Hetre tires - so nicely in fact we prefer to use these rather than the 60's. These stainless fenders are really very pleasant to install. The stay mounting (to the fender) is perhaps the best we've seen and makes for more toe clearance than a typical Honjo type mounting. The front fender is indented by the crown, and both fenders are pre-drilled for the stays. The rear fender is drilled by the chainstay bridge but you will need to drill by the seatstay bridge and if you are mounting the front fender to the underside of your front rack. 

The photo is just for illustration and shows one of the many Berthoud fenders we offer. If the cart says we are out of stock, please email us as we can usually get these back in stock in just 3 or 4 business days.

Price: $74.00

Berthoud 26x50 fenders & special hardware
Berthoud 26x50 fenders & special hardware

Berthoud 26"x 50mm fender pair & additional hardware.  

In stock for immediate delivery!

You get more than the "typical" Berthoud fender set whe you purchase from us.  In addtion to the fender stays mounting stuff and the forkcrown Daruma, you receive also a package of 6 Phil's leather washers (3 thick and 3 thinner) as well as  6 M5 bolts and washers to attach to most bridges and some rack undersides.  

Note that fenders do pose safety risks. If something gets wedged between a fender and wheel, lock-up can occur which can be catostrophic up front. 

Be sure to select $10 shipping (to the lower 48) if you select this item

These fenders are flatter (less height for their width) than may other fenders which allows them to provide maximum clearance in tighter spaces.  These stainless fenders are really very pleasant to install. The stay mounting (to the fender) is perhaps the best we've seen and makes for more toe clearance than a typical Honjo type mounting. The front fender is indented by the crown, and both fenders are pre-drilled for the stays. The rear fender is drilled by the chainstay bridge but you will need to drill by the seatstay bridge and if you are mounting the front fender to the underside of your front rack. 

The photo is just for illustration and shows one of the many Berthoud fenders we offer. If the cart says we are out of stock, please email us as we can usually get these back in stock in just 3 or 4 business days.

Price: $74.00